|
|
|
|
|
To contact us: Call 1-216-536-1140 or email sales@omnipotentparts.com
|
|
This form requires Adobe Reader® 7.0 or greater. To download the latest version of Adobe Reader, go to www.adobe.com. |
|
| Transmission Products | |
 |
Chrome Moly Transmission Plate SKU 1001 $95.00 The chrome moly transmission plate is laser cut from 4140 chrome moly. This product is affordable insurance to keep a transmission running for years at peak performance. The plates are sandblasted, coated with WD-40 and sealed. The plate will fit the following transmissions: A465, A525, A520 and A555. These will not fit A523 or A568 transmissions. The original plate was made of mild steel. Over time, that plate will bend from the bearings preload. OMNI-Potent’s transmission plate will not bend and will provide the rigidity needed for your transmission. |
 |
Blak Trax Limited Slip Differential (LSD) Unit SKU 1002 $235.00 This block style limited slip differential is the perfect solution for all around traction. Our units are made of high quality tool steel and have red springs, which are good for 680-730 lbs of force. If you want all around performance with an occasional trip up the track or autocross, you can’t beat this unit! This unit will fit A520, A555, A523, A568, A413 and A604 transmissions. These will not fit an A525 transmission. Compared to the equivalent high end block style units it was designed to compete with, this price is unbelievable. |
 |
SKU 1003 $35.00
A
block style limited slip needs to make a full sweep area on the spider
gears. Since the factory gears have a lip on them, OMNI-Potent
recommends purchasing this kit with our Blak Trax LSD unit. We’ve thought of your investment and added the insurance of
differential pin brackets as well. The kit contains:
Just
ship us back your original spider gears** and we will refund your
shipping! ** A $55 fee will be charged for the non-trade of spider gears.
|
 |
SKU 2002 $28.00 Made from 304 Stainless Steel, the brackets can be used for TI and TII engines. We designed them to be factory replicas with a twist - Durable. The old ones rusted so badly you’ll be relieved to get it off and put this one. Head Gasket repairs will be easier and no potential manifold cracking. There are VNT replica brackets in stock as well! Stainless Steel bolt and washer included. |
 |
SKU 2001 $40.00 A replica of the factory block off plate. Added at the Whittier plant, this plate was installed to cover the hood louver on an L-body after the drip pan was cut off. This allowed room for the two piece intake. These plates are made of mild steel and sold in primer so you can paint it to match your car. This would be ideal to replace the rusty factory ones that weren’t painted very nice, converting a car to Turbo II or just for added room in the engine compartment. They include 4 stainless steel screws and 4 lock washers. |
 |
Stainless Steel L-Body Rear Axle Brake Lines SKU 4001 $48.00 Stainless Steel rear axle brake lines for L-bodies (Rampage/Scamp not included). These are the lines that run from the center of the car, along the trailing arm and out to the wheel cylinders. Again, we applied OMNI-Potent’s philosophy to factory – Durable. Complete stainless steel (including the shielding/armor) with brass fittings, these sturdy, bendable lines are a breeze to install. Once these are installed, you won’t have to think about these lines again. Some slight bending may be required on drum cars. Bending will definitely be required on cars changed over to rear wheel disc brakes. |
 |
Rear Axle/Trailing Arm Spacers SKU 2003 $25.00 Another OMNI-Potent customer request. The rear axle/trailing arm spacers bolt in between your rear axle hubs and the brake backing plate. This kit will push the rear wheels out by a total of ½” across your car, or ¼” per side. Perfect as the existing factory bolts are ¼” too long per side to match. No additional items are needed in this kit. Made of aluminum, they are lightweight and compact. It makes for an aggressive stance to the rear of the car. These will fit H, K, J, G, P and L-bodies. |
 |
SKU 2004 $18.00 Many of our customers have taken the air conditioning out of their car. This plate creates a cover for the expansion coil (at the firewall). These are made of aluminum and come with two bolts. Just because you’ve taken the A/C out of your car doesn’t mean you may not want to put it back. Don’t ruin your remaining A/C components! This is a great dress up item to give your engine compartment a more finished look. These will fit H, J, K, L, P and G bodies.
|
| Cooling System | |
 |
Gates® TII Upper Radiator Hose SKU 5003 $22.00 These hoses will fit H, J, K, P and G bodies with an intercooler. Also, 87-88 Shelby CSX uses this radiator hose. These are the finest hoses available on the market today. Gates is a world class NOS/OEM hose supplier to the Auto Industry. These hoses are proudly made here in the USA! With the time and effort you have put in your car, you can never be too safe! |
 |
GLHS Upper Radiator Hose SKU 5001 $38.00
A revolutionary product to the Shelby Dodge world – GLHS Upper Radiator Hose! These are for factory intercooled L bodies. This hose runs from the radiator to the thermostat housing. As exact factory replicas, these have the correct bends and length. This is what the market has been missing! We are fortunate to have one of the biggest rubber companies in the world make these hoses for us – so we can provide them for you! |
 |
SKU 5002 $48.00 A revolutionary product to the Shelby Dodge world – GLHS Lower Radiator Hose! These are for factory intercooled L bodies. This hose runs from the radiator to the water pump. As exact factory replicas, these have the correct bends and length. Doesn’t your ‘S car deserve some nice new hoses? No need to put the same 20 year old rubber back on your car. Another product that shows OMNI-Potent is looking to keep your cars running! |
 |
GLHS Radiator Hose Set SKU 5004 $80.00 Take advantage of our set pricing! Save $6!!! Affordable Insurance for your investment! |
 |
SKU 3002 $38.00
The
2-door L-body restoration-repaint kit contains four bags with all
fasteners needed for reassembling the front air dam, inner fender wells
and side ground effects. Included
in this kit:
|
 |
SKU 3004 $37.00
The
2 door L-body windshield kit contains all items needed to install your
windshield. Universal parts
for Charger and Rampage models, these are so hard to find.
Not anymore. This
kit addresses all your windshield needs. It will be a perfect time to replace those wiper bushings as
well. Included in this kit:
|
 |
SKU 3003 $24.00
The
2 door L-body headlight kits contain all items needed to align your
headlights. Sure, you could
purchase a kit in the auto store, but you will need at least three of
them to work on one car! Never
the right amount of anything. This
is one kit and contains everything you need. This will fit Charger and Rampage models.
Included in this kit:
|
 |
SKU 3006 $18.00
The
2-door L-body fender extension kit contains all items needed to reattach
your front fender extensions. The
factory attachments were never so nice! Paint these to match your car.
Included in this kit:
|
 |
SKU 3005 $18.00
The
2-door L-body rear bumper kit contains all items needed to reattach your
rear bumper. It’s
possible that scrap metal was used to make the factory ones! Included in this kit:
|
 |
SKU 3001 $44.00
The
4-door L-body restoration-repaint kit contains six bags with all
fasteners needed for reassembling the front air dam, ground side
effects, headlight buckets and grille, hatch molding, bumper cover
attachments and inner fender wells. Included in this kit:
|
|
|
SKU 3004 $37.00
The
4 door L-body windshield kit contains all items needed to install your
windshield. Universal parts
for Omni models, these are so hard to find.
Not anymore. This
kit addresses all your windshield needs. It will be a perfect time to replace those wiper bushings as
well. Included in this kit:
|
|
|
SKU 3003 $24.00
The
4 door L-body headlight kits contain all items needed to align your
headlights. Sure, you could
purchase a kit in the auto store, but you will need at least three of
them to work on one car! Never
the right amount of anything. This
is one kit and contains everything you need. This will fit Omni models.
Included in this kit:
|
|
|
SKU 3003 $24.00
The
P Body (87-88 model years only) headlight kits contain all items needed to align your
headlights. Sure, you could
purchase a kit in the auto store, but you will need at least three of
them to work on one car! Never
the right amount of anything. This
is one kit and contains everything you need. This will fit Dodge
Shadow, Plymouth Sundance models.
Included in this kit:
|
